Water still flows after main shutoff is closed

Sink still running after main shutoff closed

Water at a faucet after a supposed main closure can be finite stored drainage, an incorrectly identified control, a passing valve or another actual feed. Treat the main as unverified isolation until the relevant boundary is established.

Safety and immediate control

Keep away from wet electrical equipment. Do not touch wet appliances, plugs or switches, or enter water to reach a breaker. When no gas leak is suspected, power may be isolated only from a safely accessible dry location; otherwise call an electrician or emergency help. Wet equipment needs qualified assessment before it is used again.

For active leakage, use only a separate identified, safely accessible owner-operated control under its known method, without force, or request prompt supplier/plumber assistance. A curb key, reachable meter box or property boundary does not establish permission to operate supplier equipment. Follow the actual supplier rules; Seattle’s different customer and crew controls are an example, not a universal ownership map.

Record the original observation

  • Which control was moved, its known role and the original downstream flow duration/strength.
  • Meter location relative to that valve, known branches before it and any separate supply.
  • Existing supplier outage/work information and whether a leak remains uncontrolled.

What the evidence establishes

An upstream curb stop normally supplies an open service; it does not itself bypass a sound downstream main. Closing upstream water can stop a downstream fault too, so that response does not locate a defect upstream of the meter. A brief trickle alone does not prove failed seating.

What to do next

  1. Do not proceed to disconnect a pipe to see whether the main holds. Use safe independent containment or obtain prompt help for continuing uncontrolled water.
  2. Identify the actual meter–valve–branch arrangement from records and qualified tracing. A meter can register a branch before the indoor valve; movement alone cannot locate a failed seat.
  3. Report existing sustained flow separately from a small declining amount already stored downstream. Do not wait for a fixed time or run many fixtures as a universal isolation certificate.
  4. Do not close every heater, irrigation or fixture valve sequentially to infer a hidden bypass. A changed response changes the arrangement without uniquely locating the source.
  5. Have the provider establish every feed and verify effective isolation before service. Continued flow after supposed independent closure is a stop condition, not permission to remove the bonnet.

Before opening the pressure boundary

A main shutoff cannot isolate its own upstream side. Closing its handle or opening a downstream faucet leaves its inlet connected to supply. Before opening a bonnet, replacing packing, cutting pipe or loosening a connection, arrange separate effective upstream isolation for every relevant feed, controlled pressure release and verification. If water continues or isolation cannot be established, stop and leave the assembly intact; obtain supplier or qualified plumbing help.

Before any internal service or fitting removal, identify and isolate every supply that can pressurize the section, release trapped pressure through the appropriate controlled outlet and verify depressurization. Account for hot water and possible alternate feeds. Lowering a PRV setting, reducing flow or wearing gloves does not make a pressurized assembly safe to open. If isolation cannot be established, leave it assembled and obtain qualified help.

Keep independent isolation effective while any pressure-retaining part or connection is open. Fully secure compatible rated parts before controlled restoration under the actual product and installation procedure. Any required flushing needs a relevant secured discharge path and an accepting drain; never reopen supply into an exposed pipe or removed assembly aimed at a bucket. Verify leakage and the required shutoff function before relying on the repair.

Does the correct curb key authorize me to close it?

No. The actual supplier and equipment determine permitted customer operation. Contact the provider when ownership, authority or method is uncertain; normal safe operation of a known permitted owner valve remains a different case.

Related guides

Safety sources

Find another plumbing guide

Need help with a different area? Choose a topic, then find the guide that matches your symptom.

Browse plumbing topics

Start with the affected area, then choose the guide that matches what happened.