If water still appears after someone attempted a curb-stop shutoff, stop turning and contact the responsible provider. There is no universal travel distance, number of turns or seating-resistance test for an unidentified buried valve.
Safe access and permitted operation
If fuel gas is suspected, leave the building or affected area immediately. Do not operate valves, switches, plugs, appliances or phones there. Call the gas emergency service from a safe location well away, and wait for responders’ clearance.
Keep away from wet electrical equipment. Do not touch wet appliances, plugs or switches, or enter water to reach a breaker. When no gas leak is suspected, power may be isolated only from a safely accessible dry location; otherwise call an electrician or emergency help. Wet equipment needs qualified assessment before it is used again.
Contact the water provider first to identify the actual component, ownership, permitted operation and responsible service. An absent seal or a property-line location is not permission to turn or repair a meter valve. Use a clearly identified private emergency shutoff only when operation is permitted, its purpose is known and access is dry and safe; do not force it. Leave unknown, shared and fire-service controls to their responsible provider.
For help interpreting the observations already available, use Curb Stop Won’t Fully Shut Off Water: Flow and Pressure. That companion explains why valve position, meter movement, outlet flow and safe service isolation are different evidence.
Keep the existing evidence
- Who attempted the shutoff, actual valve identification and any provider instruction.
- Original brief flow versus continuing delivery, existing meter observation and known alternate feeds.
- Any leakage or damage visible from safe access, without another closing trial.
What the pattern can establish
Meter movement during an attempted shutoff does not locate a leak upstream or downstream. Stored water, an incorrectly identified/ineffective valve, other feeds and the actual meter topology can change the observation; no single outcome establishes which part failed.
What to do next
- Report the failure to obtain effective isolation before any repair proceeds. Tell the provider if water is uncontrolled or a crew is relying on that isolation.
- Do not count turns, feel for a seat, apply a curb key or repeatedly close/reopen to diagnose internals.
- Use permitted private emergency containment only under the safe-access conditions above; it does not establish meter-side isolation.
- Have the provider verify the actual controlled supply, remaining feeds and model/condition before selecting repair. A stopped dial or temporarily quiet faucet does not certify every pressure boundary.
The actual pressure boundary
A house shutoff downstream of a meter may stop household flow while leaving the meter, its upstream valve and fittings pressurized. An open house faucet does not prove every connected feed or trapped chamber is isolated. Internal service requires the actual permitted upstream isolation, all other feeds/returns, controlled pressure release and verification, compatible retained parts and model-specific refitting/commissioning. A towel, bucket, slow turn or gloves is not isolation.
Can a freely turning curb key prove a broken stem?
It is an observation to report, not a generic diagnosis. Identify the actual valve design, coupling and controlled supply before service.
Related guides
- Meter valve leaking after city repair
- Water pressure changed after curb stop use
- Curb Stop & Meter Valve Problems
- Meter valve stuck open
- City shut off water but house still has pressure